prevention of electrical hazards

Methods of prevention of electrical hazards

1 - must when installing electrical wiring for lighting purposes to be in the pipes insulated from the inside may not be left open so as not to leak or moisture affect the heat and an electrical lead to the Palace
2 - should not hold the wire to shorten it or cast it beats the screws closer to the walls and for failure to cut the wire size required by

3 - You should be wires and cables used in electrical connections suitable for the current passing through them and the delivery of metal structures for electrical ground.

4 - Do not download any electrical socket in excess of the unit and note any hotter when the keyboard or the electric wiring to inform the competent for the work necessary and should not do any work of electrical or repairs except by specialists in the field of electricity.

5 - Connect the equipment compound land is suitable for static discharge any shipments once generated.

6 - should be wires and cables used in electrical connections suitable for the current passing through them and the delivery of metal structures for electrical ground.

7 - Do not download any electrical socket in excess of the unit and note any hotter when the keyboard or the electric wiring to inform the competent for the work necessary and should not do any work of electrical or repairs except by specialists in the field of electricity.

8 - When installing any electrical equipment or motors or Kmahullac switches or electrical Altablohat in any place must be of these devices are safe as well.

9 - you must prevent any possibility of a sudden touch of the current-carrying conductors

10 - Electrical devices must be placed in the least possible area or in a room of their own, and if placed in the open must fencing protective barriers to prevent the approach.

11 - should be placed next to the instructions warning devices and conductors carrying electrical current passing through showing the amount of voltage to these devices, especially in devices that carry a high pressure stream should be clear instructions and easy to read so easily

12 - must be based on maintenance works for electrical technicians and workers should not be carried out any repairs or installations in appliances not yet make sure that the passage of electric current and connected to the land and must use appropriate personal protective equipment

13 - you must perform regular maintenance of electric appliances and if you discover any damage or any risk being repair damage and remove the causes of hazards immediately

14 - should not be exposed electrical wiring covered with rubber or plastic to the sun or heat so as not to damage the rubber if sustained for a long time 0

15 - Do not paste colored paper or tape on the wires in the festivities or decorations so as not to be allowed to take fire from any spark occurs or the result of contact with a hot lamp for 0

16 - must be taken into account in the development of Alokbas boxes (fuses), distribution panels switches that are outside the rooms containing dust or fumes or substances or flammable gases 0

17 - must be allocated Okbas Fund (Fuses) for each set of connections and a knife to cut the current in the cases and must be forced to use electric automatic separator (Srki breaker) to separate the electricity in the event of an electrical fault.

18 - keys must be used within the stores of chemicals isolated from the deadly kind of spark for this purpose 0

19 - must cut power to all facilities in the case of evacuated Kalorh and stores after office hours and when leaving the house for a long time such as traveling, for example power supply must be separated from the house.

20 - is strictly prohibited to link or install (Aldoayat) or electrical switches in walls and ceilings, or any material connected to the stream directly because there is a strong possibility always be the wires that are behind this Aldoayat or Mufaath non-insulated well Vtaatard to moisture and the resulting short circuit and thus cause Fire