Safety procedures
in dealing with materials and devices:
1 - safety procedures in dealing with tires
Dealing with the tires is limited to
trained personnel.§
adhere to wear personal protective
equipment necessary to perform the work.§
tire is inflated in steel cages
allocated to it.§
taking into account the safety standard
blower tires and a commitment to use in such operations.§
maintain the integrity of the air
compressor and other equipment associated with this work.§
conduct periodic inspection for the
future of air in the compressor (Alkimberasr) once a year at least.§
2 - safety procedures in dealing with the detergent
for the washing and cleaning committed
to only using detergents and never use gasoline for this purpose.§
You must use gloves to protect hands
(gloves made of the material (PVC) should also protect the eyes using either
glasses or protective face.§
must be well ventilated area.§
Keep cleaning materials, flammable away
from the flame or sparks and other sources of open flame.§
Apta data sheet when used detergents.§
If the scattering drops wash your eyes
with a full Gusala lotion eyes and see the eye doctor when necessary.§
Wash your hands with soap and water at
the end of the work.§
Do not store gasoline in plastic
containers labeled detergent.§
Do not take food or drink during your
interactions detergent.§
Open the packaging carefully in an area
with good ventilation.§
When you move the detergents and other
chemicals, use the appropriate method to reduce the risk of inhalation or skin
contact with or drink.§
Close the blood contaminated or damaged,
avoid re-use.§
3 - safety in welding and cutting operations
strictly prohibited to use compressed
gas cylinders that have given up hours of organization or pressure cylinders
damaged by these hours and until they are replaced.§
must open the cylinder valve or line
reached by the organizations to prevent the discharge of dust and impurities in
the organizer.§
not open the cylinder valve and linear
gradually.§
must be adhered to close the cylinder
valve and the discharge gas from the regulator valve to open a tube and blowing
it at the close of the cylinder.§
• Check hoses and flamethrower regularly
to ensure their safety and readiness to work and make sure§ the hoses are connected securely to
the device and has no leaks.
do a leak check using soap and water and
careful use of the flame for this purpose.§
Make sure there are no sharp edges
materials near gas pipes, friction or impact with leads to the destruction of these
hoses, leaking gas.§
does not allow the use of gas cylinders
or conduct of any of the welding personnel is trained and experienced.§
must be maintained on the survival of
your cylinder cover in place until needed for use.§
use only approved equipment for opening
or closing valves and cylinders cleaning operator flame.§
Make sure the hoses gas (acetylene and
oxygen) away from the passage of vehicles or heavy vehicles above even if it
were not used to protect it from wear and tear.§
You must provide all equipment for
autogenous welding Bkwabh flash back and check valves, flame does not return to
the apostate hoses and cylinders.§
commitment to run the welding torches
using Mashaal flame known as Flantajn.§
prevents the implementation of the combustion
on the floor or near or concrete walls so as not to cause these surfaces to the
hottest fires.§
must wear personal protective equipment
at work.§
You must provide local ventilation (fans
suction) to remove the gases and fumes from the welding operations in enclosed
spaces.§
must weld and his aides to make sure
their clothes are clean and free of oils and fats to avoid burning by sparks.§
must be a commitment not to smoke.§
ensure that there are fire extinguishers
(dry powder), and knowledge workers to use.§
4 - Safety in the use of hand-preparing
To all workers in the workshops into account the following general rules when
using the kit manual at work:
ensure the safety of any of the
equipment prior to use well-examined.§
Use the kit for its intended purpose
only and right way and not allowed to amend or adjust the equipment to make
them differently.§
are not allowed to carry hand tools Hand
when ascending stairs or landing nor shall throw it from one level to another
or from one workplace to another place.§
ensure the cleanliness of hand tools
from oil, grease and other contaminants that impede the tightening of her
arrest during use.§
You must save the hand tools to use when
you're putting in place specific and rank are safe.§
You must choose the correct size and
type of work tool before use, especially tensile keys.§
Do not try to lengthen the hand key or
key tensile England
Do not use the key to tensile or
screwdrivers and other tools Kmatarqh.§
No comments:
Post a Comment
Welcome: Your comments very important for our progress