PERFORMANCE MEASUREMENT AND MONITORING

Procedure VIII - Monitoring and measuring performance

(Clause number 4.5.1 - according to the international specification of the system)

PERFORMANCE MEASUREMENT AND MONITORING 

1 - Objective:

The objective of this procedure is to describe the system of control and measure the performance of a safety management system and occupational health in the organization.

2 - Application:

This procedure applies to all sites and branches of the institution and public administration

3 - Definitions:

3-1 - Safety Officer: Chief Executive Officer is responsible for safety in the organization (varies according to the unnamed institution (Director of Safety / Safety Monitor / Safety Engineer / Head of Department or safety management / supervisor safety / safety officer / safety coordinator)

3-2 - Review: Meeting of the administrative review of the system

3-3 - Equipment: Personal protective equipment for workers

Emergency preparedness and response

Procedure  VII - Emergency preparations and response

(clause No. 4-4-7 - according to the international specification of the system)

Emergency preparedness and response

1 - Objective:

To identify the potential of the institution to deal with and respond to incidents and emergency situations and to ensure that the emergency plan:

 will be reviewed properly and detailed after each emergency§

 be implemented and response workers§

 that the emergency plan is tested periodically.§ To ensure the benefit of workers and the effectiveness of the plan and the devices used.

Compressed Gas Cylinder Safety

Compressed Gas Cylinder Safety

INTRODUCTION

Many industrial and laboratory operations require the use of compressed gases for a variety of different operations.

Compressed gases present a unique hazard. Depending on the particular gas, there is a potential for simultaneous exposure to both mechanical and chemical hazards. Gases may be:

•         Flammable or combustible

•         Explosive

•         Corrosive

•         Poisonous

•         Inert

•         or a combination of hazards

If the gas is flammable, flash points lower than room temperature compounded by high rates of diffusion present a danger of fire or explosion.

Additional hazards of reactivity and toxicity of the gas, as well as asphyxiation, can be caused by high concentrations of even "harmless" gases such as nitrogen.

Since the gases are contained in heavy, highly pressurized metal containers, the large amount of potential energy resulting from compression of the gas makes the cylinder a potential rocket or fragmentation bomb.

Careful procedures are necessary for handling the various compressed gases, the cylinders containing the compressed gases, regulators or valves used to control gas flow, and the piping used to confine gases during flow.

operational control

Procedure VI - operational control

(Clause number 4.4.6 - according to the international specification of the system)

Operational Control

1 - Objective:

To specify the operations and activities associated with the risks that were identified during the risk assessment process, which requires action

2 - Application:

This procedure applies to all operations of the Foundation

Documents and data control

Procedure V:

Documents and data control

(Clause number 4.4.5 - according to the international specification of the system)

Document and data control

1 - Objective:

To make sure that all documents and document management system safety and occupational health are reviewed and approved for publication as an essential element and it is found in the right place and that any amendments which are approved and noted that the employee responsible

2 - Application:

This procedure applies to all documents relating to the system of safety management and occupational health

CONSULTATION and COMMUNICATION PROCEDURE

Procedure IV  

                    ( Clause  number 4.4.4 - according to the international specification of the system)

CONSULTATION and COMMUNICATION PROCEDURE

1 - Objective:

The objective of this procedure to get the system and instructions and responsibilities relating to the direction of communication processes in the system of safety management and occupational health to ensure the availability of an effective system of communication to and from staff and other relevant authorities

2 - Application:

This system applies to the following connections:

 Policy Occupational Safety and Health§

 procedures for Occupational Safety and Health§

 sources operating§

 the efficiency of system safety management and occupational health§

 suggestions and feedback from staff and other relevant authorities§

TRAINING AWARENESS AND COMPETENCE

Third procedure

( clause  number 4.4.3 - according to the international specification of the system)

TRAINING AWARENESS AND COMPETENCE

1 - Objective:

The objective of this procedure is to get the system to identify training needs and provide training for staff and all employees and maintain records of training for system safety and occupational health

2-Application:

 This procedure applies to all employees and for employees in the organization (state name of your organization)