records and records

Procedure X - records and records management

(clause number 4.5.3 - according to the international specification of the system)

1 - Objective:

The objective of this procedure

1-1 - in establishing and maintaining documented procedures to define and collect, and the introduction of indexed files, file storage, maintenance and destruction of records of occupational safety and health

1-2 - to define the storage safety records, health professional and that you save from damage and to facilitate the process of reference through the process of identification, collection, indexing and display.

1-3 - to ensure that these legal records are maintained and orderly.

2 - Application:

This procedure applies to all departments and sections included in the application to qualify for the safety management system and OHSAS18001 occupational health

      

3 - Definitions:

3-1 - Guide: A guide occupational safety and health

3-2 - Plan: Safety Plan

3-3 - accidents: accidents at work

3-4 - Requirements: System requirements and standards of OHSAS18001

3-5 - safety records: records that were created to form the objective evidence of activities carried out and results achieved, as well as records that are maintained by a manual reflects compliance with the requirements and effective application of the system in all of the institution.

NON-CONFORMANCES AND CORRECTIVE AND PREVENTIVE ACTION

Procedure IX :

 ACCIDENTS, INCIDENTS, NON-CONFORMANCES AND CORRECTIVE AND PREVENTIVE ACTION

(Clause number 4.5.2 - according to the international specification of the system)

1 - Objective:

For the system and clear instructions and to determine responsibilities for dealing with and investigating accidents and incidents and breaches the system (cases of non-conformity with the system)

2 - Application:

Procedure applies to the safety management system and occupational health and applied in the entire organization

3 - Definitions:

3-1 - Act: The Department of Safety and Occupational Health

3-2 - Safety Officer: Chief Executive Officer is responsible for safety in the organization (varies according to the unnamed institution (Director of Safety / Safety Monitor / Safety Engineer / Head of Department or safety management / supervisor safety / safety officer / safety coordinator)

3-3 - Reports of non-compliance: Reports issued by the officials after visits regulatory audits on cases of violation of the system.

PERFORMANCE MEASUREMENT AND MONITORING

Procedure VIII - Monitoring and measuring performance

(Clause number 4.5.1 - according to the international specification of the system)

PERFORMANCE MEASUREMENT AND MONITORING 

1 - Objective:

The objective of this procedure is to describe the system of control and measure the performance of a safety management system and occupational health in the organization.

2 - Application:

This procedure applies to all sites and branches of the institution and public administration

3 - Definitions:

3-1 - Safety Officer: Chief Executive Officer is responsible for safety in the organization (varies according to the unnamed institution (Director of Safety / Safety Monitor / Safety Engineer / Head of Department or safety management / supervisor safety / safety officer / safety coordinator)

3-2 - Review: Meeting of the administrative review of the system

3-3 - Equipment: Personal protective equipment for workers

Emergency preparedness and response

Procedure  VII - Emergency preparations and response

(clause No. 4-4-7 - according to the international specification of the system)

Emergency preparedness and response

1 - Objective:

To identify the potential of the institution to deal with and respond to incidents and emergency situations and to ensure that the emergency plan:

 will be reviewed properly and detailed after each emergency§

 be implemented and response workers§

 that the emergency plan is tested periodically.§ To ensure the benefit of workers and the effectiveness of the plan and the devices used.

Compressed Gas Cylinder Safety

Compressed Gas Cylinder Safety

INTRODUCTION

Many industrial and laboratory operations require the use of compressed gases for a variety of different operations.

Compressed gases present a unique hazard. Depending on the particular gas, there is a potential for simultaneous exposure to both mechanical and chemical hazards. Gases may be:

•         Flammable or combustible

•         Explosive

•         Corrosive

•         Poisonous

•         Inert

•         or a combination of hazards

If the gas is flammable, flash points lower than room temperature compounded by high rates of diffusion present a danger of fire or explosion.

Additional hazards of reactivity and toxicity of the gas, as well as asphyxiation, can be caused by high concentrations of even "harmless" gases such as nitrogen.

Since the gases are contained in heavy, highly pressurized metal containers, the large amount of potential energy resulting from compression of the gas makes the cylinder a potential rocket or fragmentation bomb.

Careful procedures are necessary for handling the various compressed gases, the cylinders containing the compressed gases, regulators or valves used to control gas flow, and the piping used to confine gases during flow.

operational control

Procedure VI - operational control

(Clause number 4.4.6 - according to the international specification of the system)

Operational Control

1 - Objective:

To specify the operations and activities associated with the risks that were identified during the risk assessment process, which requires action

2 - Application:

This procedure applies to all operations of the Foundation

Documents and data control

Procedure V:

Documents and data control

(Clause number 4.4.5 - according to the international specification of the system)

Document and data control

1 - Objective:

To make sure that all documents and document management system safety and occupational health are reviewed and approved for publication as an essential element and it is found in the right place and that any amendments which are approved and noted that the employee responsible

2 - Application:

This procedure applies to all documents relating to the system of safety management and occupational health