Safety procedures in dealing with materials and devices

 Safety procedures in dealing with materials and devices:

1 - safety procedures in dealing with tires

 Dealing with the tires is limited to trained personnel.§

 adhere to wear personal protective equipment necessary to perform the work.§

 tire is inflated in steel cages allocated to it.§

 taking into account the safety standard blower tires and a commitment to use in such operations.§

 maintain the integrity of the air compressor and other equipment associated with this work.§

 conduct periodic inspection for the future of air in the compressor (Alkimberasr) once a year at least.§

 Safety procedures in the workshops, battery chargers, welding shops rubber,

First, the design of the workshop

 must be all the elements of the workshop materials, non-flammable§

 - take into account the availability of adequate natural ventilation openings on the area of ​​not less than (sixth) area of ​​the workshop§

 - Jeb availability of natural lighting the appropriate slots§

 - matching all wiring and electrical installation of the technical assets safe§

 - Listed arise from non-combustible to put the batteries§

 - workshop provides an electrical breaker to disconnect the power cord after the end of daily work, or when emergency§

Safety measures in car workshops

Safety measures in car workshops

This includes personal safety and the safety of personnel, vehicles, equipment and facilities and the safety of the environment.
Risks Porsche cars:

Vehicle / car as a source of risk:

- toxic gases (carbon monoxide)
- a potentially explosive gas (fuel vapors, gas battery)
- harmful gases (fuel vapors, acids)
- Plankton air (filings brakes, diesel soot smoke)
- toxic liquids (fuel, brake fluid)
- cocktails acids (acid battery)
-flammable liquids (fuel, brake fluid)
- hot liquids (liquid cooling)
 -slippery liquids (oils and fluids poured on the ground)
- parts and materials under pressure (springs, pools pressure, compressed air)
 -heavy parts (parts of the car, the car on the lift)
- rotating parts (belts, fan)
- hot parts (brakes, radiator,)
-sharp parts (iron sheets car)
- electric current (with HV, Blacks, Blacks cable)
- moving vehicles
- loud noise (engine)

Safety requirements in mechanical workshops

Safety requirements and safety in 
:mechanical workshops

:A - General procedures for safety in the workshops

 First, the design of the workshop

 must be all the elements of the establishment of the workshop materials, non-flammable§

 must be poured concrete floor to prevent the drink material and petroleum oils§

 must be safe all electrical connections§

 provide the workshop stream breaker to switch off the power after the end of daily work, or when emergency§

 The workshop provides a resource and an aqueous wash basin and a suitable system for the exchange§

safety precautions in dealing with electricity

 procedures and safety precautions in dealing with electricity

Have on workers in the workshops of the institution comply with procedures and safety precautions for the prevention and protection from power supply and in particular consider the following:

 not to touch any of the electrical conductors before hand to make sure that its activity using electrical measuring devices allocated to it.§

 not to resort to the introduction of the parties to the bare electrical wiring in the sockets and the use of Almkabbas triangular.§

 Ensure that all electrical connections are covered with insulating material and protected by a secure way.§

 not to walk over the wires and electrical connections and not to pass the machines and the development of hardware and hand tools over it for fear of damage to packaging buffer and exposure to infection.§

 not to exceed the load allocated to the electrical circuits and electrical circuits used only in the load limits allocated to them.§

safety regulation in the technical operations

Management and safety regulation in the technical operations


Policies, responsibilities and duties:

A - safety policies and occupational health:

* Within the general policies of the institution / company in the provision of safety factors in the whole areas of activity practiced by the Foundation seeks to ensure the safety of property and workers in the maintenance activity in accordance with the following policies:

 implementation of maintenance operations in a manner to ensure the health and safety of workers in the workshops and ensure the safety of dealing with these workshops.§

 ensure the safety of property through the safe operation of all machinery, equipment and devices used in the completion of maintenance operations.§

 implementation of its business in ways that protect the environment and prevent pollution and provide a safe working environment free of risks.§

 full compliance with the laws and regulations of the State related to safety and occupational health.§

Risks of medical work

Biological risks 

And here we show the vital nature of the risk from the viewpoint of occupational safety in a simple and will not expand out of the door of medical specialization, where some believe may be contaminated by the basic bio-medical work, but only the fact that there are other sources of pollution. Valverosat and bacteria that can be transmitted through:

1)  infected patients and contaminated instruments

2) contaminated food

3) place contaminated